- ST ARM ST-LINK 프로그래머 LC2

- ST-Link는 ST Microelectronics의 STM8 and STM32 마이크로 컨트롤러 모든 제품에 사용 가능한

  디버거/프로그래머(in-circuit debugger and programmer)이다.

- STM8 and STM32 마이크로 컨트롤러 플래시 메모리에 JTAG/SWD 인터페이스를 이용해서

  프로그래밍(Read and Write) 및 디버깅이 가능하다.

- 5V power suppiled by USB connector.

- USB 2.0 full speed interface compatible.

- USB standard A to Mini-B cable provided.

- SWIM specific features:

  65V to 5.5V application voltage supported on SWIM interface.

  SWIM low speed and high speed modes supported.

  SWIM programming speed rate:

- 9.7 Kbytes/s in low speed.

- 12.8 Kbytes/s in high speed.

  SWIM cable for connection to an application with an ERNI standard connector vertical

  (ref:284697 or 214017) or horizontal (ref:214012).

  SWIM cable for connection to an application with pin headers or 2.54mm pitch connector.

- JTAG/SWD specific features:

  3V to 3.6V application voltage supported on JTAG/SWD interface   and 5V tolerant inputs.

  JTAG/SWD cable provided for connection to a standard JTAG 20-pin pitch 2.54mm connector.

  Direct firmware update feature supported (DFU).

  Status LED which blinks during communication with PC.

  Operating temperature 0 to 50°C

- Supported Devices

  STM32

  STM32F100xx, STM32F101xx, STM32F102xx, STM32F103xx, STM32F105xx, STM32F107xx, STM32F2xxx, STM32F4xxx,

  STM32L15xx6, STM32L15xx8, STM32L15xxB, STM32L151xC, STM32L151xD, STM32L152xC, STM32L152xD,

  STM32L162xD,STM32TS60,STM32W108C8, STM32W108xB, STM32W108xC, STM32W108xZ

   STM8

  STM8AF51x, STM8AF52x, STM8AF61x, STM8AF62x,STM8AH51x, STM8AH61x, STM8S003K3, STM8S003F3, STM8S005C6,

  STM8S005K6, STM8S007C8, STM8S103xx, STM8S105xx, STM8S207xx, STM8S208xx, STM8S903F3, STM8S903K3,

  STM8L101xx, STM8L15x, STM8L16x, STM8TL52x4,STM8TL53x4

- ST ARM ST-LINK 프로그래머 LC2 * 1pcs